Fightboard

Have you ever been frustrated with fightsticks? Do you want something to use on your desk that isn’t a massive box you have to put away somewhere when you’re not using it? Do you prefer the natural spacing of a keyboard over the finger-stretching traditional arcade buttons? Maybe you want something that you can easily use on-the-go. The Fightboard aims to solve all of those problems.

Features

Ergonomic layout

The Fightboard uses a combination of an arrow/wasd cluster at a 20% angle and action buttons following the traditional arcade stick layout but with the spacing of keyboard keys.

Hot-swap sockets

Unhappy with your switch coice? Want different zones with different types of switches? All you have to do is pull them out and swap them with whatever you prefer, no soldering required.

RGB LEDs

The RGB LEDs indicate the function of each button. The default profile uses Xbox colors for the 4 face buttons, but these can be changed to suit your preferences or the colors used in-game. The LED for each key turns off when the key is pressed and fades back on when released.

Idle mode

The LEDs will turn off after a minute of inactivity. Pressing any button will turn them back on.

Easy remapping

Settings are all built into the keypad and allow you to remap keys on-the-fly.

SOCD cleaning

Left+Right will cancel each other out and Up+Down will function as Up.

Firmware

As of 7/6/21, a newer version of the Fightboard was released, which will be referred to in this section as the Fightboard V2. Since the V2 was released after firmware version 1.4, that is the earliest firmware version available (though I don’t recommend you use earlier firmware versions anwyay.) Read the readme in the zip for installation instructions.

Version	Fightboard V1	Fightboard V2
1.0	Link	–
1.1	Link	–
1.2	Link	–
1.3	Link	–
1.4	Link	Link

There is also an alternative firmware written by Jason Skuby/FeralAI that brings native compatiblity with the Nintendo switch, but is missing features like remapping and custom LED colors. Since the V2 uses different LEDs, I’ve made a fork of the code specific to the V2, but any feature requests or bug reports should be made to the original author’s github.

Version	Fightboard V1	Fightboard V2
0.1	Link	Link

Compatibility

The Fightboard is only compatible with PC out of the box, but can be made compatible with the adapters listed below (and the Switch with the firmware above.)

System	Compatible	Link
PC	Yes	No adapter needed
Switch	Yes	See above for alternative firmware or Amazon (Brook) / Amazon (Mayflash)
Xbox One	Yes	Amazon
PS4	Yes	Amazon
Xbox 360	No	Not compatible

Menu

All settings are accessible from the controller itself by pressing left+right+home.

Brightness control

You can increase or decrease the brightness of the LEDs by holding up or down from the main menu.

Direction mode

As of firmware version 1.2, you can change the directional keys to function as either a dpad or the left analog stick, since some games require one or the other. After entering the menu, you can press L3 to enable dpad mode (the keys will turn red) and R3 to enable left stick mode (the keys will turn yellow.)

Profiles

From the main menu, you can press one of the 8 keys on the right to switch between 8 different profiles. These all have independent settings so you can set up each profile for a different game, each with different colors and mappings.

Button swapping

You can press the start button after entering the menu to enter the button swapper. In this mode, pressing one of the 8 buttons on the right will make it pulse quickly. Press another button and the two buttons will swap places, along with their colors.

Color changing

You can also press back on the main menu to enter color changing mode. Pressing one of the keys will cycle through RGB for that key.

Warning

Remapping and color changing are only available for the 8 keys on the right. The d-pad keys are not reconfigurable.

Resetting

Pressing L3 and R3 simultaneously in the main menu will clear the current profile back to its default settings.

Exiting menus

Pressing the home button will always take you one step back out of a menu, meaning it will take you to the main menu on the color changer or remapper and exit from the main menu.